Shenzhen Hopesun Tech Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Chen Jammy
  • Company Name : Shenzhen Hopesun Tech Co., Ltd.
  • Tel : 86-755-23159225
  • Fax : 0086-755-23159236
  • Address : Guangdong,Shenzhen,C1626, 16/F, Niulanqian Building, Minzhi Road, Minzhi St., Bao'an District
  • Country/Region : China
  • Zip : 518000

6A 10A 15A 20A 30A 40A 50A 60A solar power controller for street lamp

6A 10A 15A 20A 30A 40A 50A 60A solar power controller for street lamp
Product Detailed
Related Categories:Solar Controllers
solar power controller : 1.For street lamps 2.CE, TUV approved 3.ROHS standard 4.Complete electronic protection

 solar power controller , controller ,solar charge controller :

Hopesun ,an expert of Solar controller.

Hopesun solar controller (Hopesun charge controller,solar regulator,solar charge controller) applies in solar photovoltaic systems, which coordinates the working of solar panels, batteries and loads. It adds some protection functions,

so that the entire system can be in efficient and safe operation.

 

 

Functions and features :

 

1. Solar light-adjusting lamp controller is controlled by micro-CPU, which can apperceive light of outside intelligently.

It automatically turn on when dark and off when reached adjusted time or in the morning, then automatically turn off the lights in half an hour, in which the full power light can be set.

2.Our controller is also in charge of battery SOC,it can automatically turn off the light when voltage is low to protect the  battery.

3.It switches into the condition of float-charge controlled by PWM automatically if the batteries are full with electricity.

 4.It will cut off charging circuit in order to protect batteries from discharging through solar panel at dark.

5. Moreover, the controller has a perfect protection circuit to prevent itself from being damaged accidently.

Connection

 

1) The controller must be connected to linear loads such as LED lamps, light bulbs, etc.

2) The terminal must be against oxidation and mould, to make sure the connection is in good condition.

3) While installing the system, the controller must be connected to the battery before connecting to the loads and solar panel.

4) Please reference the below technical parameter to choose the right wire size according to the current.

 

Specification :

 

   Model-HPS

 

Parameter

AL2415 6A-15A

AL2460 20A-60A

AL4860 10A-60A

System voltage  

12 V / 24V Automatic Recognition                               

48 V

Max charge current  

6A-10A-15A

20A-30A-40A-50A-60A

10A-15A-20A-30A-40A-50A-60A

Max discharge current

6A-10A-15A

20A-30A-40A-50A-60A

10A-15A-20A-30A-40A-50A-60A

Highvoltage disconnect (HVD)         13.7V~14.4V / 27.4V~28.8V / 54.8V~57.6V

Low voltage disconnect(LVD)          10.5V—11V / 21V—22V /   42V—44V

Low Voltage Restore (LVR)                  11.8V / 23.6V / 47.2V

Length≤1m

Charging Circuit’s Voltage-drop                     <300mV

Length≤1m

Discharging Circuit’s Voltage-drop                   <50mV

Light-control                           Light control turn on + light control turn off

Light control + time control       Light control turn on + light control turn off / time setting turn off

Time control classification                0.5 hours + 0.5 hour per step up to 10 hours

Output route                             Single output for up to rated current        

Ambient temperature                            -25°C—55°C

Quiescent dissipation                                24mA

International protection rating                           IP22

 

 

 

6A 10A 15A 20A 30A 40A 50A 60A solar power controller for street lamp



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.